RAM 1500 Van V6-3.9L VIN X (1997)
6. Remove the gear from the mounting bracket.
INSTALLATION
1. Position steering gear mounting bracket on gearbox. Install mounting bolts and tighten to 142 Nm (105 ft. lbs.).
2. Position the steering gear and bracket on the frame rail. Install the bolts and tighten bolts to 136 Nm (100 ft. lbs.).
3. Align the coupler shaft index marks to the steering gear and steering shaft.
4. Install the steering coupler and install new bolts. Tighten bolts to 49 Nm (36 ft. lbs.).
5. Align and install the pitman arm.
6. Install the washer and retaining nut on the pitman shaft. Tighten the nut to 251 Nm (185 ft. lbs.).
7. Connect fluid hoses to steering gear. Tighten hoses to 28 Nm (21 ft. lbs.).
8. Add fluid, perform Power Steering Pump Initial Operation.
