RAM 1500 Van V8-5.2L VIN Y (1999)
Pump Mounting
5. Remove pump bracket.
INSTALLATION
1. Install pump bracket to pump and tighten the bolts to:
-
3.9L & 5.2L engine: 54 Nm (40 ft. lbs.)
-
5.9L engine: 28 Nm (21 ft. lbs.)
2. Install the power steering pump pulley.
3. Install pump assembly on engine block and tighten bolts to 41 Nm (30 ft. lbs.).
4. Connect hoses to pump and tighten fitting to 35 Nm (25 ft. lbs.).
5. Install serpentine belt.
6. Fill pump reservoir with power steering fluid only, refer to Initial Operation procedures.
