RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Turbocharger Vane Actuator: Service and Repair
Turbocharger Actuator - Removal
6.7L DIESEL
1. Disconnect the battery negative cables.
2. Raise vehicle on hoist.
3. Drain cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
4. Remove air filter housingSee: Air Cleaner Housing/Service and Repair/Air Cleaner Body - Removal
5. Disconnect turbocharger actuator electrical connector (1).
6. Remove turbocharger actuator mounting bolts (3).
7. Remove turbocharger actuator (2).
8. Clean mounting surface.