RAM 2500 Truck 2WD V8-5.7L (2008)
Front Door Interior Handle: Service and Repair
Installation
INSTALLATION
1. Position the interior door handle actuator (5) onto the door (1).
2. Install the two nuts (4) that secure the interior door handle actuator to the door. Tighten the nuts to 10 Nm (89 in. lbs.).
3. Connect the actuator rod (3) to the interior door handle actuator and the door latch (2), if removed.
4. Reposition the water dam and install the door trim panel See: Front Door Panel/Service and Repair/Front Door Trim Panel - Installation .