RAM 2500 Truck 2WD V8-5.9L VIN Z (1997)
NOTE: To aid in the removal of the trim panel, start at the bottom of the panel.
Power Mirror Switch Connector
10. Unplug the power mirror switch wire harness connector.
11. Remove the power mirror switch from the door trim panel.
12. When installing the power window and lock switch bezel to the door trim panel, insert the rear of the bezel into the trim panel opening, then push
down on the front of the bezel until the retaining tab snaps into place.
13. Reverse the remaining removal procedures to complete the installation.
