dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Engine/Lighting - Stoplamp Switch/Vacuum Pump Rev.|Page 3764 > < Engine/Lighting - Stoplamp Switch/Vacuum Pump Rev.|Page 3762

RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)

Page 2
background image

Vacuum Pump Mounting

6. Remove lower bolt that attaches pump assembly to engine block.
7. Remove bottom, inboard nut that attaches adapter to steering pump. This nut secures a small bracket to engine block. Nut and bracket must be

removed before pump assembly can be removed from block.

Pump Assembly Upper Mounting Bolt

8. Remove upper bolt that attaches pump assembly to engine block.
9. Remove pump assembly from vehicle.

NOTE:  The vacuum pump and adapter are serviced as an assembly and must not be separated.

Engine/Lighting - Stoplamp Switch/Vacuum Pump Rev.|Page 3764 > < Engine/Lighting - Stoplamp Switch/Vacuum Pump Rev.|Page 3762