RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
3. Tighten cylinder head cover bolts and double ended studs to 8 Nm (70 inch lbs.). Begin torque sequence in the middle of head cover and torque
bolts moving outward in a crisscross pattern from top to bottom.
4. Install ignition coil on plug (5), and torque fasteners (6) to 12 Nm (105 inch lbs.).
5. Connect, ignition coil electrical connectors (4).
6. Install PCV hose.
7. Connect battery negative cable.