RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Seals and Gaskets: Service and Repair
Seal-Adapter Housing
SEAL-ADAPTER HOUSING
REMOVAL
1. With vehicle in neutral, position vehicle on hoist.
2. Mark propeller shafts and yokes for installation reference and remove the shafts.
3. Support transmission with a transmission jack.
4. Remove engine rear support.
5. Remove transfer case.
6. Remove adapter housing (1) seal (2) with a seal pick.
INSTALLATION
1. Install adapter housing (1) seal (2) with Installer C-3860-A and Handle C-4171.
2. Install transfer case.
3. Install propeller shafts with reference marks aligned.
4. Fill transfer case and transmission to proper level.