RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Transmission Shift Position Indicator Lamp: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS AND SEAT BELTS/AIRBAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster from the instrument panel.
Gear Selector Indicator Remove/Install
3. Remove the two screws that secure the gear selector indicator mechanism to the rear of the instrument cluster housing.
4. Remove the gear selector indicator mechanism from the cluster housing.
5. Place the gear selector lever on the steering column in the Park position.
6. Remove the knee blocker from the instrument panel.
Gear Selector Indicator Cable Remove/Install