RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
NOTE: Driver side air outlet shown. Passenger side outlet similar.
1. If required, install the head lamp switch (1) onto the air outlet (2)See: Lighting and Horns/Headlamp/Headlamp Switch/Service and
Repair/Headlamp Switch - Installation.
2. If servicing the driver side air outlet, connect the head lamp switch wiring harness to the head lamp switch See: Lighting and
Horns/Headlamp/Headlamp Switch/Service and Repair/Headlamp Switch - Installation.
3. Position the air outlet to the opening in the instrument panel cover (3) and align the outlet to the instrument panel duct.
4. Engage the retaining tabs that secure each air outlet to the instrument panel cover. Make sure the retaining tabs are fully engaged.
Rear Seat Air Outlets
REAR SEAT AIR OUTLETS
NOTE: The air outlets are retained into the air outlet housing by eight retaining tabs. The air outlets must be first installed onto the bottom
set of retaining tabs, then the upper set of tabs can be engaged.
1. Position the rear air outlets (1) to the back of the rear air outlet housing (2) and engage the lower set of retaining tabs (3).
2. Gently engage the upper set of retaining tabs (4). Make sure all of the retaining tabs are fully seated.
