RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Front Door Latch: Service and Repair
LATCH
REMOVAL
1. Raise the window to the full up position.
2. Remove the waterdam. Refer to Front Door Panel.
3. Disconnect the actuator rods.
Fig. 9
4. Remove the bolts. (Fig. 9)
5. Disconnect the electrical connector and remove the latch.
INSTALLATION
1. Connect the electrical connector and install the latch assembly.
2. Install the bolts and tighten to 10 N.m (89 in.lbs).
3. Connect the actuator rods.
4. Adjust the latch as needed.
5. Install the waterdam.
