RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
2. From inside the fender, install the two hinge bolts and tighten to 20 N.m (15 ft.lbs).
3. Install the hood nuts and line up the marks made previously.
4. Tighten the nuts to 23 N.m (17 ft.lbs).
5. Install the support cylinder.
6. Install the fender support bolt and tighten to 11 N.m (8 ft.lbs).
7. Check hood fit and adjust if required. Refer to Body and Frame / Specifications / Dimensions.
8. Install the cowl grille.
9. Install the wheelhouse splash shield.