RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
3. Install the HVAC housing.
Removal
REMOVAL
WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or
service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system capacitor to discharge before
performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions could
result in an accidental airbag deployment and possible personal injury or death.
NOTE: Take the proper precautions to protect the instrument panel from cosmetic damage.
1. Remove the instrument panel and place it on a workbench.
2. Remove the radio.
3. Remove the defroster duct.
4. Remove the two screws (1) that secure the center distribution duct (2) to the instrument panel support (3) and remove the duct.
5. Disconnect the right side instrument panel duct adapter (2) from the right side instrument panel duct (1) and remove the adapter.
6. Remove the screw that secures each intermediate demister duct (3 and 4) to the instrument panel cover.
7. Disconnect the intermediate demister ducts from the demister ducts and remove the intermediate ducts.
8. Disconnect the left side instrument panel duct adapter (6) from the right side instrument panel duct (5) and remove the adapter
