RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Axle Bearing: Service and Repair
Front Axle - C205FD
Removal
REMOVAL
1. Remove half shaft from vehicle.
2. Clean axle seal area.
3. Remove O-ring (1) and snap ring (2) from axle shaft (3).
4. Remove axle with Remove 8420A (2) (3) Collar 8420-3 (4) and Slide Hammer C-3752.
5. Remove axle shaft seal with a seal puller.
6. Install axle shaft bearing Remover C-4660-A (3) in the bearing (1). Then tighten the nut (2) to spread remover in the bearing.
