RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
INSTALLATION
1. Install the window regulator (4) through the opening in the door (2).
2. Engage the two regulator bolts (6) to the door.
3. Install the two bolt (5) that secure the window regulator to the door and tighten all four regulator bolts to 10 Nm (89 in. lbs.).
4. Position the regulator stabilizer (1) into the door and install the two nuts (3). Tighten the nuts to 10 Nm (89 in. lbs.).
5. Raise the window regulator (2) to the position shown and remove the manual window crank.
6. Support the window glass and remove the wooden wedge or equivalent.
7. Position the window glass to the window regulator and install the two nuts (1) thought the two sight windows (3 and 4). Tighten the nuts to 10 Nm
(89 in. lbs.).
8. Install the waterdam See: Front Door Panel/Service and Repair/Front Door Watershield - Installation.
9. Install the inner belt molding See: Front Door Window Glass/Front Door Window Glass Weatherstrip/Service and Repair/Front Door Molding -
Installation.
