RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
3. Move the load floor (2) to the up position.
4. Remove the two bolts (3) that secure the load floor to the floor panel (1) and remove the load floor.
5. If required, remove the support cylinder (4).
Load Floor - Installation
INSTALLATION
1. If removed, install the load floor support cylinder (4).
2. Position the load floor (2) into the vehicle and install the two bolts (3) that secure it to the floor panel (1). Tighten the bolts to 40 Nm (30 ft. lbs.).
