RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
5. Install the grab handle (1) onto the B-pillar and install the two bolts (3). Tighten the bolts to 6 Nm (55 in. lbs.).
6. Close the two fastener covers (2) located on the grab handle.
Lower
REMOVAL
1. Remove the upper C-pillar trim panel See: Pillar Trim/C-Pillar Trim Panel - Removal.
2. Remove the bolt (3) that secures the seat belt (2) to the bottom of the C-pillar (4) and position the seat belt out of the way.
3. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower C-pillar trim panel (1) to the C-pillar.
4. Remove the seat belt from the lower C-pillar trim panel through the slot provided and remove the trim panel.
Upper
REMOVAL
