RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
4. Install the hard stop screw (2) and push the drive cable and guide assembly (1) up against the hard stop screw (2).
5. Verify that the opposite guide assembly is also positioned up against the hard stop screw.
6. Install the wind deflector as necessary. See: Sunroof / Moonroof Windguard/Service and Repair/Wind Deflector - Installation
7. Install the motor as necessary See: Sunroof / Moonroof Motor/Service and Repair/Sunroof Motor - Installation.
8. Install the drain channel arms (3) into the mechanism (1) holes one at a time with the reinforcements on the inside of mechanism arms (2).
CAUTION: Do not pry the channel arms apart at the same time or you could break the drain channel.
9. Install the sunroof assembly into the vehicle. See: Service and Repair/Sunroof - Installation
10. Perform the sunroof position calibration. See: Sunroof / Moonroof Motor/Testing and Inspection/Programming and Relearning/Sunroof Position
Calibration.
11. Install the glass as necessary. See: Sunroof Glass - Installation
12. Adjust sunroof glass to fit flush with roof line See: Adjustments.
13. Verify proper operation of the power sunroof system.
