RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
12. Secure the seat back cover lower J-straps.
13. Install the rear screw of the kneel handle bezel.
14. Position the rear load floor cover back.
15. Return the rear seat back into the full up position.
Under Seat Storage Bin Latch - Removal
REMOVAL
1. Open the under seat storage bin.
2. Remove the two screws and remove the latch assembly.
Under Seat Storage Bin Latch - Installation
INSTALLATION
1. Install the latch assembly and install the screws.
Seat Back - Removal
REMOVAL
