RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Seat Cover: Service and Repair
Seat Back Cover - Installation
Front
INSTALLATION
1. Install the seat back cushion and cover onto the seat frame assembly.
2. Connect the zip strip at the bottom of the seat back.
3. Install the headrest sleeves. See: Head Rest/Service and Repair/Headrest Sleeve - Installation
4. Install the lumbar bezel and handle, if equipped. See: Service and Repair/Lumbar Support Handle And Bezel - Installation
5. Install the seat. See: Service and Repair/Seat, Center/Seat - Installation
Mega Cab Rear
REMOVAL
1. Place cover over the foam and install onto the seat pan.
2. Connect the J-straps to the pan.
3. Install the release/recliner handle.
4. Install the cushion assembly onto the seat assembly.
5. Install the lower cushion pivot bolts.
6. Install the upper cushion pivot bolts.
7. Install the cables at the cushion using the marks made during removal.
8. Install the seat back onto the seat and install the four bolts.
9. Connect the lower cable attachment for the seat back release.
10. Install the lower anchor for the center seat belt.
11. Install the hinge covers.
12. Connect the J-straps at the bottom of the seat back being worked on.
13. Install the filler panels.
Rear
INSTALLATION
1. Install the seat back cover and connect the zip strip.
2. Install the headrest sleeves. See: Head Rest/Service and Repair/Headrest Sleeve - Installation
3. Install the seat back. See: Seat Back/Service and Repair/Seat Back - Installation