RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel, See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel
Bezel - Removal.
3. Disconnect the switch/module electrical connectors.
4. Using an appropriate flat bladed tool, remove the heated seat switch/module from the bezel.
