RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Cover - Installation
INSTALLATION
1. If removed, install the washer nozzles and the cowl plenum washer hose onto the cowl grille (2) See: Wiper and Washer Systems/Windshield
Washer Spray Nozzle/Service and Repair/Washer Nozzle - Installation.
2. Position the cowl grille onto the dash panel.
3. Install the two screws (3) and the six push-pin fasteners (1) that secure the cowl grille to the dash panel.
4. Install the cowl weather seal onto the front of the dash panel and the cowl grille.
5. Connect the cowl plenum washer hose to the washer supply hose at the molded plastic in-line fitting See: Wiper and Washer Systems/Windshield
Washer Hose/Description and Operation/Washer Hoses and Tubes - Description.
6. Install the wiper arms See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arm - Installation.
