RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Ball Joint: Service and Repair
Front Suspension Upper Ball Joint - Installation
3500 CAB CHASSIS
1. Position Remover/Installer 8445-2 (DRIVER) (2) and Ball Joint Remover/Installer 8975-5 (RECEIVER) (5) with Ball Joint Press C-4212F (1) as
shown to install upper ball stud (3).
2. Install the axle shaft into the axle, refer to Differential and Driveline/Front Axle.
3. Install the steering knuckle See: Front Steering Knuckle/Service and Repair/Installation.