RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber - Removal
REMOVAL
1. Raise vehicle and support the axle.
NOTE: The rear upper shock attachment uses a flag nut. Do not use an air tool to remove the bolt, the flag may rotate into the bottom of the
bed and cause damage. Use a wrench to hold the nut when loosening.
2. Remove the upper shock bolt and nut (1). Discard the fasteners for the 4500 AND 5500 vehicles.
3. Remove the lower shock bolt and nut. Discard the fasteners for the 4500 AND 5500 vehicles.
4. Remove the rear shock absorber (3) from the vehicle.