RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Constant Velocity Joint: Service and Repair
Drive Shaft, Inner Joint - Installation
INSTALLATION
1. Clean all C/V joint components and shaft.
2. Slide new boot (1) down the half shaft.
3. Install tripod (2) and tripod snap ring on the half shaft.
4. Pack grease supplied with the joint/boot into the housing and boot.
5. Coat tripod with supplied grease.
6. Install new bushing (1) onto the housing (2).
7. Insert the tripod and shaft in the housing.
