dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fluid - A/T|Testing and Inspection > < Fluid - A/T|Capacity Specifications
Page 1
background image

Fluid - A/T: Fluid Type Specifications

AUTOMATIC TRANSMISSION FLUID (All but AISIN Transmission)
Mopar ATF +4 Automatic Transmission Fluid

AISIN TRANSMISSION
Mopar AS68RC Automatic Transmission Fluid

Dexron II fluid IS NOT recommended. Clutch chatter can result from the use of improper fluid.

NOTE:  Mopar ATF +4 and AS68RC, Automatic Transmission Fluids when new are red in color. The ATF is dyed red so it can be identified from other 
fluids used in the vehicle such as engine oil or antifreeze. The red color is not permanent and is not an indicator of fluid condition. As the vehicle is
driven, the ATF will begin to look darker in color and may eventually become brown. This is normal. ATF +4 and AS68RC, also have a unique odor that
may change with age. Consequently, odor and color cannot be used to indicate the fluid condition or the need for a fluid change.

DaimlerChrysler strongly recommends against the addition of any fluids to the transmission, other than those automatic transmission fluids listed above.
Exceptions to this policy are the use of special dyes to aid in detecting fluid leaks.

Various "special" additives and supplements exist that claim to improve shift feel and/or quality. These additives and others also claim to improve
converter clutch operation and inhibit overheating, oxidation, varnish and sludge. These claims have not been supported to the satisfaction of
DaimlerChrysler and these additives must not be used. The use of transmission "sealers" should also be avoided, since they may adversely affect the
integrity of transmission seals.

Fluid - A/T|Testing and Inspection > < Fluid - A/T|Capacity Specifications