RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
8. Remove the secondary retaining clip (2) from the spring-lock coupler that secures the front section of the A/C liquid line (1) to the rear section of
the liquid line (3).
9. Using the proper A/C line disconnect tool (Special Tool Kit 7193 or equivalent), disconnect the front section of the A/C liquid line from the rear
section of the liquid line and remove and discard the O-ring seals.
10. Install plugs in, or tape over the opened ends of the A/C liquid lines and the condenser port.
11. Remove the front section of the A/C liquid line from the engine compartment.
REAR SECTION
12. Disconnect and isolate the negative battery cable.
13. Recover the refrigerant from the refrigerant system.
14. Remove the passenger side battery.
15. Disengage the rear section of the A/C liquid line (2) from the body retaining clip (5).
16. Remove the secondary retaining clip (1) from the spring-lock coupler that secures the front section of the A/C liquid line (6) to the rear section of
the A/C liquid line.
17. Using the proper A/C line disconnect tool (Special Tool Kit 7193 or equivalent), disconnect the front section of the A/C liquid line from the rear
section of the liquid line and remove and discard the O-ring seals.
18. Remove the secondary retaining clip (3) from the spring-lock coupler that secures the rear section of the A/C liquid line to the evaporator tube (4).
19. Using the proper A/C line disconnect tool (Special Tool Kit 7193 or equivalent), disconnect the A/C liquid line from the evaporator tube and
remove and discard the O-ring seals.
