RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
1. Move the transmission manual shaft lever to the manual LOW position.
2. If necessary, install the TRS mounting bracket (2) into the transmission case. Using Adapter 8581 (3), tighten the mounting bracket to 34 Nm (300
in.lbs.).
3. Install the TRS (3) into the mounting bracket (2) with the wiring connector facing the front of the transmission.
4. Install the two screws to hold the TRS to the mounting bracket. Tighten the screws to 5 Nm (45 in.lbs.).
5. Verify proper sensor operation (1-4).
6. Move the transmission manual shaft lever to the PARK position.
