RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
2. Install Turnbuckle 8885-1(2) into installer cups and expand the turnbuckle until the seals bottom out in the housing.
3. Install adjuster (1) into the differential housing (2).
4. Install differential in housing.
5. Install axle shaft and hub bearings.
Removal
REMOVAL
1. Mark propeller shaft and pinion flange (1) for installation reference.
2. Remove propeller shaft.
3. Remove hub bearings and axle shafts.
4. Rotate pinion gear three or four times.
5. Record pinion torque to rotate (1) with an inch pound torque wrench (2) for installation reference.
