RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Shifter Transfer Case: Service and Repair
NV271 Transfer Case
Removal
REMOVAL
Transfer Case Shifter
1. Shift transfer case into 2H.
2. Raise and support the vehicle.
3. Loosen adjusting trunnion lock bolt and slide shift rod out of trunnion. If rod lacks enough travel to come out of trunnion, push trunnion out of
shift lever.
4. Lower vehicle.
5. Remove transfer case shifter knob cap.
6. Remove nut holding shifter knob (2) to shift lever.
7. Remove shifter knob.
8. Remove the shift boot from the shifter console.
9. Remove the bolts securing the shifter mechanism to the floor pan.
10. Separate shift lever mechanism from the vehicle.
Installation
INSTALLATION
