RAM 4500 Chassis Cab Truck 4WD L6-6.7L DSL Turbo (2011)
3. Measure the right (passenger side) and Left (driver side) tie rod ball stud housing angles from underneath the truck. Hold tie rod alignment adapter
tool (Miller # 10326-1) securely under the circular bottom plane of the ball stud housing (Fig. 2)
NOTE:
Ensure the tool makes contact with the entire perimeter of the ball stud housing and not resting on the domed cap or grease fitting.
4. Mount an inclinometer with a magnetic bottom (Miller # 10326-2) on the flat bottom surface of the adapter in the fore-aft orientation (Fig. 3)
