RAM SRT-10 Pickup V10-505 8.3L (2004)
The two upper tether anchors (3) for standard cab models are integral to the upper cab back panel reinforcement and are concealed behind individual
trim cover and bezel units (1) that are integral to the cab back trim panel (2). These upper tether anchors cannot be adjusted or repaired and, if faulty or
damaged, they must be replaced as a unit with the upper cab back panel reinforcement. The upper tether anchor trim covers and bezels are serviced as a
unit with the cab back trim panel.
The three upper tether anchor straps (1) for quad cab models are secured to the upper cab back panel (2) reinforcement with screws (3). These anchor
straps are concealed behind the upright rear seat back. The upper tether anchor straps are available for individual service replacement.
The lower anchors (2) for all models are integral to their respective front or rear seat cushion frame. Round markers (3) with an imprinted child seat icon
on the standard cab front seat back trim cover helps identify the anchor locations for that application because they may be otherwise difficult to see with
the seat back in the upright position. These lower anchors are each constructed from round steel bar stock that is formed into a U-shape, then securely
welded at each end to the seat cushion frame. They are each accessed from the front of their respective seats, at each side where the seat back meets the