RAM SRT-10 Pickup V10-505 8.3L (2004)
1. Position the center (5) or the left outboard (4) occupant buckle unit onto the rear floor panel (7) or onto the rear seat mounting bracket near the
base of the cab back panel (1). On models with the optional 60/40 split rear bench, the screw that secures the buckle unit also secures one of the
rear seat mounting brackets to the rear floor panel.
2. Install and tighten the screw (3) that secures the center or the left outboard occupant buckle unit to the rear floor panel. Tighten the screw to 40
N.m (29 ft.lbs.).
3. Lower the rear seat cushion back to its normal seating position.
