RAM SRT-10 Pickup V10-505 8.3L (2004)
3. Position the rear center seat belt retractor (3) onto the center anchor (5) and right outboard (1) occupant buckles and mounting bracket (4) unit.
4. Install and tighten the screw (6) that secures the rear center seat belt retractor to the center anchor and right outboard occupant buckles and
mounting bracket unit. Tighten the screw to 40 N.m (29 ft.lbs.).
5. Reinstall the rear seat into the vehicle. On models with the optional 60/40 split rear bench, only the 60 percent section (right side) of the rear seat
must be reinstalled.
6. Reach between the rear seat cushion and the rear seat back to access and buckle the rear center seat belt lower anchor latch plate to the unique
black, keyed lower anchor buckle.
