Sprinter 2500 V6-3.0L DSL Turbo (2008)
Power Steering Pump: Description and Operation
Power Steering Pump - Description
DESCRIPTION
CAUTION: Use approved fluid only in the power steering system See: Maintenance See: Heating and Air Conditioning/Refrigerant/Description and
Operation/A/C Refrigerant See: Maintenance/Fluids/Fluid - A/T/Description and Operation/Description - Automatic Transmission Fluid - NAG1 See:
Maintenance/Fluids/Fluid - Differential/Description and Operation See: Brakes and Traction Control/Hydraulic System/Brake Fluid/Description and
Operation See: Powertrain Management/Fuel Delivery and Air Induction/Fuel/Description and Operation See: Engine, Cooling and Exhaust/Cooling
System/Coolant/Description and Operation/HOAT Coolant See: Power Steering Fluid/Description and Operation See: Engine, Cooling and
Exhaust/Engine/Engine Lubrication/Engine Oil/Description and Operation. No other power steering or automatic transmission fluid is to be
used in the system. Damage may result to the power steering pump and system if any other fluid is used, and do not overfill.
The pump is connected to the steering gear via the pressure hose and the return hose. The pump shaft has a pressed-on pulley that is belt driven by the
crankshaft pulley.
All vehicles are equipped with a power steering fluid cooler.
NOTE: Power steering pumps are not interchangeable with pumps installed on other vehicles.
