Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
1. Remove the rivets and remove the lower panel.
2. Remove the rivets and remove the upper panel.
Bulkhead Trim Panel - Installation
INSTALLATION
1. Install the upper panel and replace rivets.
2. Install the lower panel and replace rivets.
Cowl Trim - Removal
REMOVAL
1. Position door weatherstrip aside.
2. Remove the jack storage cover, if necessary.
3. Position aside carpet/mat, if necessary.
4. Using a trim stick C-4755 or equivalent, remove the cowl trim panel.
Cowl Trim - Installation
INSTALLATION
1. Position the cowl trim panel and seat the clips fully.
2. Install the jack storage cover, if necessary.
3. Position the carpet/mat back.
4. Position the door weatherstrips back.
Front Door Trim Panel - Removal
REMOVAL