Sprinter 3500 L5-2.7L DSL Turbo (2004)
Cutboard Rear Seat Belt Buckle
1. Unsnap and remove the plastic cover from the screw that secures the outboard rear seat belt buckle to the right side of the seat cushion frame.
2. Remove the screw that secures the outboard rear seat belt buckle to the rear seat cushion frame.
3. Remove the outboard rear seat belt buckle from the right side of the rear seat cushion frame.
INSTALLATION
1. Position the rear seat belt buckle to the right outboard side of the rear seat cushion frame.
2. Install and tighten the screw that secures the outboard rear seat belt buckle to the rear seat cushion frame. Tighten the screw to 35 Nm (26 ft. lbs.).
3. Reinstall the plastic cover onto the screw that secures the rear seat belt buckle to the right outboard side of the rear seat cushion frame.
