SRT-4 L4-2.4L Turbo VIN S (2004)
Brake Pedal Assy: Service and Repair
PEDAL
REMOVAL
NOTE: Before proceeding with this procedure, Refer to WARNING.
WITH AUTOMATIC TRANSAXLE
1. Disconnect and isolate the battery negative cable from its post on the battery.
2. Place the steering wheel and tires in the STRAIGHT-AHEAD position. Using a steering wheel holder, lock the steering wheel in place to keep it
from rotating (Fig. 98). This keeps the clockspring in the proper orientation.
3. Remove the steering column coupling retainer pin, back off the pinch bolt nut, and remove the steering column coupling pinch bolt (Fig. 99) (the
pinch bolt nut is caged to the coupling and is not removable). Separate the upper and lower steering column couplings.
4. Remove the brake lamp switch.
5. Remove the clip securing the power brake booster input rod to the brake pedal. Remove the input rod from the brake pedal.
