SRT-4 L4-2.4L Turbo VIN S (2004)
Valve Spring: Service and Repair
In Vehicle Service
VALVE SPRINGS & SEALS
REMOVAL - CYLINDER HEAD ON
1. Remove cylinder head cover.
2. Remove camshafts.
3. Rotate crankshaft until piston is at TDC on compression.
4. With air hose attached to adapter tool installed in spark plug hole, apply 90-120 psi air pressure.
5. Using Special Tool MD-998772-A with adapter 6779 (Fig. 46), compress valve springs and remove valve locks.
6. Remove valve spring(s).
7. Remove valve stem seal(s) by a using valve stem seal tool (Fig. 48).
INSTALLATION - CYLINDER HEAD ON