SRT-4 L4-2.4L Turbo VIN S (2004)
Power Steering Line/Hose: Service and Repair
Hose - Return
REMOVAL - POWER STEERING RETURN HOSE
NOTE: Before proceeding with this procedure, Refer to Service Precautions.
1. Siphon as much fluid as possible from power steering fluid reservoir.
2. Remove clamp securing fluid return hose to pump reservoir (Fig. 20), then remove hose from reservoir fitting. Cap off hose end and reservoir
fitting.
3. Back out tube nut securing fluid pressure hose to power steering pump and remove hose from pump (Fig. 20). Cap off hose end and pump pressure
port.
4. Raise vehicle.
5. Back out tube nut securing fluid pressure hose to power steering gear (Fig. 21). Cap off hose end and gear port.
6. Remove hose clamp securing return hose to power steering cooler tube (Fig. 21). Slide hose off end of tube. Cap off hose end and cooler tube.