Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
2. Use clips to secure the harness to the adjuster bracket.
3. Fit the locking claw of the inner seat belt positively in the locking hole provided in the seat bracket.
Outer Seat Belt <Front> Installation
1. Positively insert the paw to prevent the retractor from rotating in the hole provided on the body.
2. After connecting the seat belt harness with the body harness, insert the clip on the connector into the hole on the body panel.
3. Insert the pawl of the belt guide in the hole provided on the body.
4. When the final anchor of the front seat belt is installed, twist the belt through 180° at a section between the sash guide and the final anchor to
direct the tip of the tongue toward the front of the vehicle.
