dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Handling Tubing and Fittings|Page 1761 > < Handling Tubing and Fittings|Page 1759
Page 2
background image

4. Disconnect liquid line from the receiver/drier.
5. Remove the liquid line from the vehicle.

Installation
For installation, reverse the above procedures.

NOTE:  When charging system -- after replacing lines -- add 44 ml (1.50 oz) SP10 PAG (polyalkalene glycol) refrigerant oil or equivalent.

Fig 61  Clip Removal

LIQUID LINE TO CONDENSER

Removal
1. Remove refrigerant from the A/C system using a refrigerant recovery machine.
2. Remove A/C quick connect clip at condenser.

Fig 62  Quick Coupler Using Special Tool 7240

Fig 63  Line At Condenser

Handling Tubing and Fittings|Page 1761 > < Handling Tubing and Fittings|Page 1759