Stratus L4-2.4L DOHC (1995)
10.
Twist the conductors together.
11.
Solder the conductors together using rosin core solder only. Do not use acid corn solder.
12.
Center the heat shrink tubing over each joint and heat using a heat gun. Heat the joint until the tubing is tightly sealed and sealant comes out of
both ends of the tubing.
13.
Connect the connector to the A/C transducer.
14.
Connect the battery and reset radio stations and clock.
15.
Verify the A/C system is fully charged and functioning properly.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
24-35-71-94
0.4 Hrs.
FAILURE CODE:
P8 - New Part
