Stratus Coupe V6-3.0L VIN H (2001)
STEP 2. Check the harness wires from ETACS-ECU connector C-313 to column switch connector C-203, front ECU connector A-09X and
sunroof motor assembly connector D-08.
NOTE: After inspecting intermediate connectors C-28 and C-209 and joint connector C-141, check the wires. If intermediate connectors C-28 and
C-209 and joint connector C-141 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires from ETACS-ECU connector C-313 to column switch connector C-203, front-ECU connector A-09X and sunroof
motor assembly connector D-08 in good condition?
YES: Go to Step 3.
NO: Replace them. Confirm the DTC 21 is not displayed.
STEP 3. Check the column switch.
Disconnect column switch connector C-203.
Q: Does DTC 21 set?
YES: Go to Step 4.
NO (DTC 12 sets): Replace the column switch. Confirm the DTCs 12 and 21 are not displayed.