dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1894 > < Component Tests and General Diagnostics|Page 1892
Page 47
background image

STEP 7. Check the harness wires between ETACS-ECU connector C-311 and passenger's door lock actuator connector E-07.

NOTE:  After checking junction block connector C-308 and intermediate connector C-213, check the wires. If junction block connector C-308 and
intermediate connector C-213 are damaged, repair or replace them. Refer to Harness Connector Inspection.

Q: Are the harness wires between ETACS-ECU connector C-311 and passenger's door lock actuator connector E-07 in good condition?

YES: Replace the ETACS-ECU. All doors should be locked or unlocked.
NO: Repair them. All doors should be locked or unlocked.

Inspection Procedure C-3

Central door locking system: All the doors do not lock or unlock with just the door lock switch operation.

TECHNICAL DESCRIPTION (COMMENT)

The door lock switch (built into the power window switch) or the ETACS-ECU may be defective.

Component Tests and General Diagnostics|Page 1894 > < Component Tests and General Diagnostics|Page 1892