Stratus Coupe V6-3.0L VIN H (2001)
YES: Go to Step 5.
NO: Go to Step 3.
STEP 3. Check the power window connector A-04X for damage.
Q: Is power window connector A-04X in good condition?
YES: Go to Step 4.
NO: Repair or replace it. Refer to Harness Connector Inspection. The power windows should work normally.
STEP 4. Check the harness wire between power window relay connector A-04X and fusible link (4).
Q: Is the harness wire between power window relay connector A-04X and fusible link (4) in good condition?
YES: There is no action to be taken.
NO: Repair it. The power windows should work normally.
STEP 5. Check the power window main switch ground circuit at the power window main switch connector E-12.
1. Disconnect the power window main switch connector E-12 and measure at the harness side.
2. Measure the resistance between terminal 9 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 8.
NO: Go to Step6.
