Stratus Coupe V6-3.0L VIN H (2001)
STEP 5. Check the wiper motor connector A-03 and front-ECU connector A-09X for damage.
Q: Are wiper motor connector A-03 and front-ECU connector A-09X in good condition?
YES: Go to Step 6.
NO: Repair or replace them. Refer to Harness Connector Inspection. The windshield wiper should work normally when the windshield wiper switch is
set to all positions.
STEP 6. Check the harness wires between wiper motor connector A-03 and front-ECU connector A-09X.
NOTE: After checking intermediate connector C-05, check the wires. If intermediate connector C-05 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between wiper motor connector A-03 and front-ECU connector A-09X in good condition?
YES: There is no action to be taken.
NO: Repair them. The windshield wiper should work normally when the windshield wiper switch is set to all positions.
