dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1956 > < Component Tests and General Diagnostics|Page 1954
Page 109
background image

STEP 10. Check combination meter connector C-103 and ETACS-ECU connector C-312 for damage.

Q: Are combination meter connector C-103 and ETACS-ECU connector C-312 in good condition?

YES: Go to Step 11.
NO: Repair or replace them. Refer to Harness Connector Inspection. The low washer fluid level warning light should work normally.

STEP 11. Check the harness wire between combination meter connector C-103 and ETACS-ECU connector C-312.

Q: Is the harness wire between combination meter connector C-102 and ETACS-ECU connector C-312 in good condition?

YES: There is no action to be taken.
NO: Repair it. The low washer fluid level warning light should work normally.

Inspection Procedure H-1

Seat belt warning light: Seat belt warning light does not work normally.

Component Tests and General Diagnostics|Page 1956 > < Component Tests and General Diagnostics|Page 1954