dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1968 > < Component Tests and General Diagnostics|Page 1966
Page 121
background image

STEP 10. Check combination meter connector C-103 and ETACS-ECU connector C-312 for damage.

Q: Are combination meter connector C-103 and ETACS-ECU connector C-312 in good condition?

YES: Go to Step 11.
NO: Repair or replace them. Refer to Harness Connector Inspection. The door ajar warning light should work normally.

STEP 11. Check the harness wire between combination meter connector C-103 and ETACS-ECU connector C-312.

Q: is the harness wire between combination meter connector C-103 and ETACS-ECU connector C-312 in good condition?

YES: There is no action to be taken.
NO: Repair it. The door ajar warning light should work normally.

Inspection Procedure J-1

Headlight, taillight: Taillights do not illuminate.

Component Tests and General Diagnostics|Page 1968 > < Component Tests and General Diagnostics|Page 1966