dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1976 > < Component Tests and General Diagnostics|Page 1974
Page 129
background image

STEP 4. Check the headlight relay (low).

Q: Is the headlight relay (low) in good condition? 

YES: Go to Step 5.
NO: Replace it. The headlights (low-beam) should illuminate normally.

STEP 5. Check the headlight relay (low) power supply circuit at the headlight relay (low) connector A-08X.

1. Disconnect the headlight relay (low) connector A-08X and measure at the relay box side.

2. Measure the voltages between terminal 3, 4 and ground.

Q: Are the voltages approximately 12 volts (battery positive voltage)?

YES: Go to Step 8.
NO: Go to Step 6.

STEP 6. Check headlight relay (low) connector A-08X for damage.

Component Tests and General Diagnostics|Page 1976 > < Component Tests and General Diagnostics|Page 1974